WellReport Well records, made clear
149 Main St  ·  Well Record ID 7334002
Map
New to well records?

Well Record ID 7334002

149 Main St

Picton Town  ·  Prince Edward

The address the driller recorded when the well was constructed. It may differ from today's address.
Well tag
A261264

The number on the metal tag attached to the wellhead.

This page is based on one provincial well record filed near this location. The same property may have more than one.This page shows one well record. The property may have others.

See this well and its neighbours on the map →

Well log diagram

Soil and rock layers, from the surface down, with the colours recorded.

Ground layers as written in the record, top to bottom:

Depth, feet (metres) Description 1 ft (0.3 m) 13 ft (4 m) 14.5 ft (4.4 m) Other, Gravel, Hard - grey Fine Sand, Silt, Soft - brown Fine Sand, Silt, Gravel - brown Legend Sand Other / Unknown Surface seal Sand pack Casing Screen
Flow rate
Not recorded
The rate the driller recommended running a pump at, written on the well record when the well was constructed. Not a measurement of today's flow. GPM is imperial gallons per minute; LPM is litres per minute.
Well Depth
14 ft
4.4 m
How far down the hole goes, from the surface to the bottom.
Drilled into
Overburden
not solid rock
Whether the hole ends in solid rock or the loose material above it.
Location accuracy
30 m - 100 m
how far the map dot could be off
The province's rating of how far the map dot may be from the well.
Year drilled
2019
 
The year the driller finished the well.
Status of well
Not recorded
Well use: Monitoring and Test Hole

Water

Water levelNot recorded
How far down the water sits in the well with the pump off, measured from the surface. It can rise and fall with the seasons.
Water found at depthNot recorded
Depths where the driller found water, and the kind of water the driller marked on the form. 'Untested' means the driller did not check what kind of water it was.
Is the well flowingNot recorded
If the groundwater level is above the ground surface, water can flow out on its own, without a pump.
The pump test on this record
No pump test is recorded for this well.

Construction

Drilling methodOther
How the hole was made.
CompletionPlastic Screen
How the bottom of the well was finished to let water in.
Surface sealConcrete flushmount, 0 - 1 ft (0 - 0.3 m)
Benseal, 1 - 3.5 ft (0.3 - 1.1 m)
Material around the outside of the casing, near the ground. It helps keep surface water out.

Casing is the pipe lining the hole. It keeps the hole open and keeps loose ground and surface water out.

CasingDepthDiameter
Plastic 0 - 4.5 ft (0 - 1.4 m) 1.38 in (4 cm)
ScreenDepthSlot
Plastic 4.5 - 14.5 ft (1.4 - 4.4 m) 10

Sand pack: Filter sand, 3.5 - 14.5 ft (1.1 - 4.4 m)

Sand placed around the screen.

The full record

Opens the province's copy. Not every well has one.

Printing is not available yet.